0
steelkitparts.com
0
Home » Shop » Accessories » Simple Logger Model SL30 (Pulse)

Simple Logger Model SL30 (Pulse)

Original price was: $71.20.Current price is: $54.73.

Sale!

48 in stock

SKU: SL30 Category:
Share

AEMC’s Simple Logger® Data Loggers are small one channel recording devices powered by two AA alkaline batteries or through the USB port. These AC and DC loggers can be ready to go in minutes with just a few parameters to set up. Models are available for logging AC voltage, DC voltage, DC current, temperature, pulse and events. Application software is included with the unit by plugging it into your computer using the USB cable and downloading it from our web site. Scaling units of measure and recording length can be set through the software. Real-time graphs can be displayed, downloaded data can be analyzed, and reports printed. The main advantage of the logger is its ability to begin recording with only the need to configure a few parameters. A simple one button operation is all you need. The front panel LED alerts the operator of the logger’s status.

The Simple Logger® Model SL30 is a small one channel recording device powered by two AA alkaline batteries. It can also be powered by 5V using the USB interface cable supplied. The input is 0 – 5VDC facilitated by two screw terminals. Sample rate is 8/sec with a storage rate of once per second of the average of all the samples. Application software is included with the unit by plugging it into your computer using the USB cable and downloading it from our web site. Scaling units of measure and recording length can be set through the software. Real-time graphs can be displayed, downloaded data can be analyzed, and reports printed.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one button operation is all you need. The front panel LED alerts the operator of the logger’s status.

Specifications:

Channels One
Input Pulse
Range Contact closure 0 to 5VDC
Accuracy (50/60Hz) N/A
Resolution N/A
Maximum Input Voltage 10VDC
Input Impedance 800kΩ
Sample Rate Maximum 8 pulses per second
Storage Rate 1 second
Storage Modes Start/Stop
Recording Length ≥43 days
Memory 4 million measurements (8Mb). Recorded data is stored in
non-volitile memory and will be retained even if battery is low or removed.
Communication USB 2.0 (Simple Logger software free to download from web site)
Power Source 2×1.5V AA (LR6) alkaline batteries or USB 5VDC
Battery Life 43 days with new batteries when recording
Low Battery Battery voltage display in software (Batteries need replacement when the LED is dim or does not blink)
Dimensions 3.6 x 1.44 x 1.32” (91.44 x 36.58 x 34.8mm)
Weight (with battery) 3.5oz (99g)
Case Polycarbonate
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity Up to 85% @ 95°F (35°C)
Ingress Protection (IP) IP40
EMC EN 61326-1
Safety Compliance IEC 61010-1

APPLICATIONS:

  • Count events and records
  • Determine event sequencing