Absolute Process Instruments APD 3200 _ DC input potentiometer feedback valve positioner. Isolated input.
Cecomp Electronics, APD 3200, Valve Positioner, Potentiometer Feedback, 85-265 VAC, 60-300 VDC Power
Features:
- Automatic or Manual Valve Control
- Test/Manual Positioning Buttons
- Input LoopTracker® LED
- Relay Status LEDs
- High Capacity Relay Contacts
- Removable Plugs for Faster Installation
- Input/Power Isolation
- Potentiometer, Voltage or mA Feedback Models
Applications:
- Valve Position Controller
- Linear Actuator Controller
- Damper Controller
The APD 3200 D controls the position of a valve or linear actuator by comparing a DC input (control signal) to that of a position feedback potentiometer or slidewire.
An SPDT relay provides bi-directional (open-close) signals to drive a motor to open or close a valve. A bi-color LED indicates the Open/Close relay contact status.
When the valve position, as indicated by the feedback potentiometer, becomes equal to the position as represented by the control input, the relay will go to the neutral position and the motor will halt.
A multi-turn deadband control allows precise tuning of the motor response to eliminate hunting or oscillation.
Heavy-duty relay contacts allow the module to directly control high capacity loads as long as the switching current with within the limits shown at left.
Auto/Manual Switch
An Auto/Manual switch allows either closed-loop automatic valve position control or manual positioning via the Open/ Close buttons. The manual mode is useful for troubleshooting, calibration, system testing or as a manual bypass.
LoopTracker
A green LoopTracker LED varies in intensity with changes in the control input signal. Monitoring this LED can provide a quick visual picture of your process at all times and save time during initial startup and/or troubleshooting.
Specifications Table:
| Input | 0-1 V to 0-100 VDC or 0-10 mA to 0-1 ADC |
| Output | 8 A SPDT Relay with Neutral Position |
| Position Feedback | Potentiometer feedback 0-100 Ω to 0-100 kΩ |
| Control Input Impedance | Resistance: 0-100 Ω to 0-1 MΩ |
| Input Voltage Burden (Current) | 1.25 VDC maximum |
| Common Mode Rejection | 100 dB minimum |
| Input Calibration | ±10% of span adjustment range typical |
| Manual Controls | Automatic/manual switch. Manual open and close buttons. |
| Deadband | 12 turn potentiometer adjustable from 1 to 25% of span |
| Response Time | 100 milliseconds nominal |
| Isolation | Power to input isolation |
| Ambient Temperature Range and Stability | 10°C to +60°C operating ambient |
| Connectors | Four 4-terminal removable connectors, 14 AWG max wire size |
| Power | 85-265 VAC, 50/60 Hz or 60-300 VDC, 2 W maximum |
